Customising the Y Axis

You can customise the Y-Axis of an insight in the Analyzer tool. 

The following customisations can be made: 

Showing/hiding the Y-Axis name

You can show or hide the name of the Y-Axis, using the NAME toggle. 

Open

Changing the positioning of the name

You can change the alignment of the Y-Axis name. 

Select one of the following: 

• auto (default): The name is positioned in the middle of the Y-Axis on the insight by default.  

• top: The name is positioned at the top of the Y-Axis on the insight. 

• middle: The name is positioned in the middle of the Y-Axis on the insight. 

• bottom: The name is positioned at the bottom of the Y-Axis on the insight. 

For example, if you select top, the name is positioned at the top of the Y-Axis. 

Changing the rotation

You can change the rotation of the data displayed on the Y-Axis. 

Open

For example, if you select 30 degrees, the data will be displayed at a 30 degree angle.

You can change the minimum and maximum numbers displayed on the Y-Axis.